unisonic technologies co., ltd mcr100 scr www.unisonic.com.tw 1 of 6 copyright ? 2009 unisonic technologies co., ltd qw-r301-016.c sensitive gate silicon controlled rectifiers reverse blocking thyristors ? description pnpn devices designed for high volume, line-powered consumer applications such as rela y and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. ? features * sensitive gate allows triggering by micro controllers and other logic circuits * blocking voltage to 600v * on-state current rating of 0.8a rms at 80 c * high surge current capability ? 10a * minimum and maximum values of i gt , v gt and i h specified for ease of design * immunity to dv/dt ? 20v/ sec minimum at 110 c * glass-passivated surface for reliability and uniformity to-92 1 sot-23 1 2 3 sot-89 1 lead-free: mcr100l halogen-free:mcr100gg ? ordering information ordering number pin assignment normal lead free plating halogen free package 1 2 3 packing mcr100-4-x-ab3-r mcr100l-4-x-ab3-r mcr100g-4-x-ab3-r sot-89 g a k tape reel mcr100-4-x-ae3-r mcr100l-4-x-ae3-r mcr100g-4-x-ae3-r sot-23 g k a tape reel mcr100-4-x-t92-b mcr100l-4-x-t92-b mcr100g-4-x-t92-b to-92 k g a tape box mcr100-4-x-t92-k mcr100l-4-x-t92-k mcr100g-4-x-t92-k to-92 k g a bulk mcr100-6-x-ab3-r mcr100l-6-x-ab3-r mcr100g-6-x-ab3-r sot-89 g a k tape reel mcr100-6-x-ae3-r mcr100l-6-x-ae3-r mcr100g-6-x-ae3-r sot-23 g k a tape reel mcr100-6-x-t92-b mcr100l-6-x-t92-b mcr100g-6-x-t92-b to-92 k g a tape box mcr100-6-x-t92-k mcr100l-6-x-t92-k mcr100g-6-x-t92-k to-92 k g a bulk mcr100-8-x-ab3-r mcr100l-8-x-ab3-r mcr100g-8-x-ab3-r sot-89 g a k tape reel mcr100-8-x-ae3-r mcr100l-8-x-ae3-r mcr100g-8-x-ae3-r sot-23 g k a tape reel mcr100-8-x-t92-b mcr100l-8-x-t92-b mcr100g-8-x-t92-b to-92 k g a tape box mcr100-8-x-t92-k mcr100l-8-x-t92-k mcr100g-8-x-t92-k to-92 k g a bulk note: pin assignment: g: gate k: cathode a: anode mcr100l-4-x-ab3-r (1) packing type (3) rank (1) b: tape box, k: bulk, r: tape reel (2) ab3: sot-89, ae3: sot-23, t92: to-92 (4) g: halogen free, l: lead free, blank: pb/sn (2) package type (3) x: refer to cl assification of i gt (4) lead plating
mcr100 scr unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r301-016.c ? marking for sot-23 mcr100-4 mcr100-6 mcr100-8 r4 l: lead free g: halogen free r6 l: lead free g: halogen free r8 l: lead free g: halogen free
unisonic technologies co., ltd mcr100 scr www.unisonic.com.tw 3 of 6 copyright ? 2009 unisonic technologies co., ltd qw-r301-016.c ? absolute maximum ratings parameter symbol ratings unit mcr100-4 200 v mcr100-6 400 v peak repetitive off-st ate voltage(note 1) (t j =-40 ~ 110 , sine wave, 50 ~ 60hz; gate open) mcr100-8 v drm ,v rrm 600 v on-sate rms current (tc=80 ) 180 condition angles i t(rms) 0.8 a peak non-repetitive surge current (1/2 cycle, sine wave, 60hz, t j =25 ) i tsm 10 a circuit fusing considerations (t=8.3 ms) i 2 t 0.415 a 2 s forward peak gate power (t a =25 , pulse width 1.0s) p gm 0.1 w forward average gate power (t a =25 , t=8.3ms) p g(av) 0.1 w peak gate current ? forward (t a =25 , pulse width 1.0 s) i gm 1 a peak gate voltage ? reverse (t a =25 , pulse width 1.0 s) v grm 5 v operating junction temperature range (rated v rrm and v drm ) t j -40 ~ +110 storage temperature range t stg -40 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol max unit to-92 200 /w junction to ambient sot-23/sot-89 ja 400 /w ? electrical characteristics (t j =25 , unless otherwise stated) parameter symbol test conditions min typ max unit off characteristics t c =25 10 a peak forward or reverse blocking current t c =125 i drm , i rrm v d =rated v drm and v rrm ; r gk =1k 100 a on characteristics peak forward on-state voltage (note 2) v tm i tm =1a peak @ t a =25 1.7 v gate trigger current (continuous dc)(note3) i gt v ak =7vdc, r l =100 , t c =25 40 200 a t c =25 0.5 5 ma holding current (note 4) t c =-40 i h v ak =7vdc, initiating current=20ma 10 ma t c =25 0.6 10 ma latch current t c =-40 i l v ak =7v, ig=200 a 15 ma t c =25 0.62 0.8 v gate trigger voltage (continuous dc) (note 3) t c =-40 v gt v ak =7vdc, r l =100 1.2 v dynamic characteristics critical rate of rise of off-state voltage d v /dt v d =rated v drm , exponential waveform, r gk =1000 , t j =110 20 35 v/ s critical rate of rise of on-state current di/dt i pk =20a; pw=10 sec; dig/dt=1a/ sec, igt=20ma 50 a/ s notes: 1. v drm and v rrm for all types can be applied on a continuous basis. ratings apply for zero or negative gate voltage; however, posit ive gate voltage shall not be applied conc urrent with negative potential on the anode. blocking voltages shall not be tested with a consta nt current source such that the voltage ratings of the devices are exceeded. 2. indicates pulse test width 1.0ms, duty cycle 1% 3. r gk =1000 included in measurement. 4. does not include r gk in measurement
unisonic technologies co., ltd mcr100 scr www.unisonic.com.tw 4 of 6 copyright ? 2009 unisonic technologies co., ltd qw-r301-016.c ? voltage current characteristic of scr parameter symbol peak repetitive off stat forward voltage v drm peak forward blocking current i drm peak repetitive off stat e reverse voltage v rrm peak reverse blocking current i rrm peak on state voltage v tm holding current i h v tm i h on state i rrm at v rrm reverse blocking region (off state) reverse avalanche region anode- +voltage i drm at v drm forward blocking region (off state) +current anode+ ? classification of i gt rank b c aa ab ac ad range 48~105 a 95~200 a8~16 a 14~21 a 19~25 a 23~52 a
mcr100 scr unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r301-016.c ? typical characteristics -40 35 80 -10 110 10 40 gate trigger current (a) typical gate trigger current vs. junction temperature 5 20 30 50 60 70 80 90 100 65 junction temperature, t j ( ) -25 20 50 95 -40 35 80 -10 110 0.2 0.5 gate trigger voltage (v) typical gate trigger voltage vs. junction temperature 5 0.3 0.4 0.6 0.7 0.8 0.9 1.0 65 junction temperature, t j ( ) -25 20 50 95 0 0.4 0.1 0.5 40 70 typical rms curent derating 50 60 80 90 100 110 120 rms on-state current, i t(rms) (a) 0.2 0.3 180 120 90 60 30 0.5 2.0 2.9 1.1 3.5 0.1 10 typical on-state characteristics 1.4 1 2.3 instantaneous on-s tate voltage, v t (v) 0.8 1.7 2.6 3.2 maximum@t j =110 maximum@t j =25
mcr100 scr unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r301-016.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
